Hello sit . i have an android kitkat 4.4 model universal 7 inch 1024x600 Quad core
http://www.autopumpkin.co.uk/pumpkin-un ... ntrol.html
it freeze on the logo and won't start.
how can i hard reset reset the unit?
i tried to push the button in the front hole but nothing happen.
please help.
Max
Pumpkin android freeze on LOGO
Re: Pumpkin android freeze on LOGO
anyone help me???
Re: Pumpkin android freeze on LOGO
Hi, regarding your issue, you can try to install the the firmware for your unit RQ0255, here is the link for you.
https://mega.nz/#!gRES3JxT!5jsrlY3Q3ssY ... KohsV8KzKM
About the firmware installing process, please refer the below steps to check.
Please download through your browser,copy all files to an empty sd card with FAT32 format, insert the sd card to GPS slot.
Press and hold the power button, do not release, and use a sharp thin sticker to press and hold the RST button for around 10 seconds, then you release the RST button, but still keeps hold the power button, you should heard 3 beep sound, then you release the power button, and short press the power button for once, then check will it goes into a English version recovery menu? Please don't let the power off or do other operation, in case led the android board damaged. Here is a video for your reference.
https://www.youtube.com/watch?v=Vtfwfh0Olu4
https://mega.nz/#!gRES3JxT!5jsrlY3Q3ssY ... KohsV8KzKM
About the firmware installing process, please refer the below steps to check.
Please download through your browser,copy all files to an empty sd card with FAT32 format, insert the sd card to GPS slot.
Press and hold the power button, do not release, and use a sharp thin sticker to press and hold the RST button for around 10 seconds, then you release the RST button, but still keeps hold the power button, you should heard 3 beep sound, then you release the power button, and short press the power button for once, then check will it goes into a English version recovery menu? Please don't let the power off or do other operation, in case led the android board damaged. Here is a video for your reference.
https://www.youtube.com/watch?v=Vtfwfh0Olu4
Re: Pumpkin android freeze on LOGO
My pumpkin android is C0235. Today, My C0235 also has this problem. I tried to push the button in the front hole but nothing happen. Please help.
Re: Pumpkin android freeze on LOGO
Hi, here is the link of the firmware for your unit C0235, the process is as the same as the above.
https://mega.nz/#!wdcCGIYS!hKUwZA4cgzAv ... 7pGrvc4D9o
Regards
https://mega.nz/#!wdcCGIYS!hKUwZA4cgzAv ... 7pGrvc4D9o
Regards
Re: Pumpkin android freeze on LOGO
Dear Jammy san.
Thanks for file link of firmware.My C235 come back to life again.
Thank very much your prompt support!
Arigato gozaimashita.
Regards.
Thanks for file link of firmware.My C235 come back to life again.
Thank very much your prompt support!
Arigato gozaimashita.
Regards.
-
- Posts: 2
- Joined: Fri Apr 29, 2016 7:58 pm
- Contact:
Re: Pumpkin android freeze on LOGO
Hallo,
i have the same problem. I start my new 8 inch model (11-RQ0364E-DE1-A) and it freezes on the vw logo. What firmware do i need ?
Please help me
Regards
i have the same problem. I start my new 8 inch model (11-RQ0364E-DE1-A) and it freezes on the vw logo. What firmware do i need ?
Please help me
Regards
-
- Posts: 2
- Joined: Fri Apr 29, 2016 7:58 pm
- Contact:
Re: Pumpkin android freeze on LOGO
Hello,
i have the same problem, when i start my pumpkin radio (11-RQ0364E-DE1-A). What firmware do i need ? Please help me. Thank you
Regards
i have the same problem, when i start my pumpkin radio (11-RQ0364E-DE1-A). What firmware do i need ? Please help me. Thank you
Regards
Re: Pumpkin android freeze on LOGO
Hi, here is the link of the firmware for RQ0364E.
https://mega.nz/#!0MVQDSQb!4Bb7afB0w73b ... knlFuh4tsE
Regards
https://mega.nz/#!0MVQDSQb!4Bb7afB0w73b ... knlFuh4tsE
Regards
-
- Posts: 10
- Joined: Sat Jun 04, 2016 11:00 pm
- Contact:
Re: Pumpkin android freeze on LOGO
Hi Jammy - What is the link of the firmware for KD-C0234? Mine's doing the very same thing.
Return to “General Configuration”
Who is online
Users browsing this forum: No registered users and 14 guests