Backup Camera Trigger Issue

[Snelly50]

I have a KD-C1126 with a backup camera. I can't get the camera to work. I'm using the Non Cam Bus connector. Do I need the reverse wire connected? I don't see anyplace to connect it. I ran it straight off the battery and inputted into into the CAM IN connector and still nothing. Thanks for any inputs.

[Jammy]

Hi, cause the reverse detective wire has built in the connector and need to plug the canbus box to decode and transmit the reverse signal when you back your car, please remove the canbus box from the other connector and plug it into the connector you used.
If the backup camera still does not work, you just need to find the reverse detective wire and connect it to the reverse light positive pole to make it work.
Regards