Nissan x trail 2006 steering wheel controls.

[Dicky Dey]

Help! I have fitted a pumpkin android 7.1 double din radio to my Nissan X Trail 2006. I have used a connects2 harness to connect it. Everything works other than the steering wheel controls. I cannot get the radio to the screen where I should be able to choose an icon. This is with the interface on. All wires have been checked and are correct. If I unplug the interface I can then choose an icon. If I press ok it goes to the next screen but will not go any further.
Any ideas ?
Cheers

[Jammy]

Hi,
sorry for my bad english .I don't understand your query well.Could you mind show me an video?
Please first tell me your order number in amazon or buyer id in ebay,Pumpkin or AliExpress so that we can confirm more information about your unit and provide you positive solutions .
You can also directly contact the customer service or write post to support@autopumpkin.com .
Regards

[Dicky Dey]

Hi hope this helps
Transaction is 7GM60691C2511530D
Invoice number 100002505
Purchased through the Pumpkin website.

Do I need an interface for the steering wheel controls or are they analogue on a Nissan?
Many thanks

[Jammy]

Hi,
for the steering wheel control, first you need to connect the K1 or K2 and GND wire of the power cable to your car SWC connectors.Then enter settings - steering wheel study .

0222601.png (149.71 KiB) Viewed 3806 times

Here is the referring video .
https://www.youtube.com/watch?v=VxVYSwWgYb4
Regards

[schiraffe]

Hallo,

I have a Nissan x-Trail (T30) from 2004 and this radio -> https://www.amazon.de/gp/product/B07F73 ... UTF8&psc=1

I have a picture of the plug below.

How should I connect the steering wheel remote condition?

Greetings from Germany and many thanks in advance.

[Jammy]

Hi schiraffe ,

swc connection.png (233.92 KiB) Viewed 3551 times

Regards

[schiraffe]

Hello Jammy,

Thank you for the fast answer.
Everything works very well after your description.

Many thanks from Leipzig (Germany / Saxony)