I would ask if this is the last version of my Radio. I sometimes get a reboot (1x per Week), some configs needs a long time to open and so on. Maybe i have luck
Update to 6.x.x its also not possible or? (to 7 i know thats impossible)
Firmware Update for CN10-02207B
-
- Posts: 8
- Joined: Mon Aug 06, 2018 6:41 pm
- Contact:
Firmware Update for CN10-02207B
- Attachments
-
- A70B6B78-A666-4A1A-8A26-7E3D077403C3.jpeg (3.19 MiB) Viewed 1543 times
Re: Firmware Update for CN10-02207B
Hi,here is the one which system version is updated on 20170928.
https://mega.nz/#F!zawyjQCL!T6StfnGZByI7AEElycpH4g
Please unzip the files to the root content of one sd card or USB stick .
Wait for your feedback .
Regards
https://mega.nz/#F!zawyjQCL!T6StfnGZByI7AEElycpH4g
Please unzip the files to the root content of one sd card or USB stick .
Wait for your feedback .
Regards
-
- Posts: 8
- Joined: Mon Aug 06, 2018 6:41 pm
- Contact:
Re: Firmware Update for CN10-02207B
Hi. After the Update my Radio dont boot anymore . 1 of 5 files was red (Update error). What to do now?
-
- Posts: 8
- Joined: Mon Aug 06, 2018 6:41 pm
- Contact:
Re: Firmware Update for CN10-02207B
Recovery with reset button also dont work (only 1 sek "update screen") and than bootlogo ... not more...
Re: Firmware Update for CN10-02207B
Hi,it is a little strange.
Here is another firmware. https://mega.nz/#!KOQ3wApL!B79zmRVIIGCZ ... CNl4fqiQNo
Also please download and unzip it to the root content of one sd card and insert it into GPS slot. Then do as follow to flash the unit .
https://www.youtube.com/watch?v=S8Go80q4LB0
If it still doesn't help,could you mind show me an video about how you flash the unit?
Regards
Here is another firmware. https://mega.nz/#!KOQ3wApL!B79zmRVIIGCZ ... CNl4fqiQNo
Also please download and unzip it to the root content of one sd card and insert it into GPS slot. Then do as follow to flash the unit .
https://www.youtube.com/watch?v=S8Go80q4LB0
If it still doesn't help,could you mind show me an video about how you flash the unit?
Regards
-
- Posts: 8
- Joined: Mon Aug 06, 2018 6:41 pm
- Contact:
Re: Firmware Update for CN10-02207B
After i downloaded the firmware 8x and tryed 3 usb sticks and sd cards ... it suddenly works (had to removed the complete radio ... dunno why). Now its all german and works better, merci.
A question: How high should the idle current be? I have ~~ 80mA, it looks a bit high ... but never had a android radio or double din before.
A question: How high should the idle current be? I have ~~ 80mA, it looks a bit high ... but never had a android radio or double din before.
Who is online
Users browsing this forum: No registered users and 4 guests