yellow cam in wire

Mainly focus on other Accessories issue

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
steve.p
Posts: 5
Joined: Thu Jan 03, 2019 3:35 pm
Contact:

yellow cam in wire

Postby steve.p » Thu Jan 03, 2019 3:47 pm

Does anybody know where I can buy the yellow rca cam in wire
for the android 8.0



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: yellow cam in wire

Postby Jammy » Fri Jan 04, 2019 6:19 am

About this issue ,you can contact the pumpkin customer service or write to support@autopumpkin.com to get the cam wire from China .
You need to tell them your order number or ebay id so that they can confirm your unit .

steve.p
Posts: 5
Joined: Thu Jan 03, 2019 3:35 pm
Contact:

Re: yellow cam in wire

Postby steve.p » Mon Jan 07, 2019 9:44 am

I have contacted them and they want me to send money to a email address not a shop or pumpkin
is this not for sale on E bay or Amazon or any where in the UK.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: yellow cam in wire

Postby Jammy » Tue Jan 08, 2019 8:56 am

Hi, that is normal . The mailbox is an account of Paypal .Don't worry .

steve.p
Posts: 5
Joined: Thu Jan 03, 2019 3:35 pm
Contact:

Re: yellow cam in wire

Postby steve.p » Tue Feb 05, 2019 1:53 pm

hi still having problems trying to install the reversing camera
have looked on the forum pages to see if I can find the answer

but with no luck . It is a wireless model the rear sender is wired

in to the reversing light and the front is wired to the reversing wire from

the back of the unit, both are showing power when reverse is selected.

But the head unit will only show a yellow triangle and no picture have looked

though the settings in the unit but can see no cam setting to see if it is enabled

tried to get into factory setting to look but do not have a code number,

with this being fitted to a Volkswagen I have a canbus decode box so not sure if this is my problem

Hope you can help me out in trying to find an end to my problem

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: yellow cam in wire

Postby Jammy » Wed Feb 06, 2019 9:32 am

Hi, could you show me the link of the wireless cam you biught? Normally this issur is caused by no video signal sent into the unit via the rca cinnector' cam-in' .

steve.p
Posts: 5
Joined: Thu Jan 03, 2019 3:35 pm
Contact:

Re: yellow cam in wire

Postby steve.p » Wed Feb 06, 2019 11:04 am

eBay item number:
183478089978
This is the ebay.uk item number for the camera it is a
Volkswagen t5 wireless reversing camera hope this help's.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: yellow cam in wire

Postby Jammy » Fri Feb 08, 2019 2:29 am

Hi, you can try to connectthe yellow rca connector from the receiver to the vedio in connector of the unit. Meanwhile, disconnect the reverse-in wire from the canbus box, then open the app "AVIN" to see whether any imagine.

steve.p
Posts: 5
Joined: Thu Jan 03, 2019 3:35 pm
Contact:

Re: yellow cam in wire

Postby steve.p » Fri Feb 08, 2019 8:08 am

ok will give it a go over the weekend and let you know how it goes


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Accessories”

Who is online

Users browsing this forum: No registered users and 10 guests