Restart after Standby (11-RQ0264-DE-A)

Moderators: Jammy, admin

Tricktickler
Posts: 4
Joined: Wed Jun 08, 2016 8:02 pm
Contact:

Restart after Standby (11-RQ0264-DE-A)

Postby Tricktickler » Tue Aug 02, 2016 3:58 pm

Hi,

i have the problem that my device is always restarting after a standby. I have set the radio to shut down after 30min acc off.
When I turn on the acc before that, the Radio wakes up and even the music plays for a sec. Then it just restarts :?:
The funny thing is after a normal start in the morning (device was shut down) the device also restarts after a sec.

Any ideas?

Thank you
Markus



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby Jammy » Wed Aug 03, 2016 9:54 am

Hi, the "standby" on the unit is used for turning on the unit without starting the android system which reduce the boot time.
If you don't set the shut down after 30min acc off, then if you restart the unit, it will take 20-30 second to boot.
Regards

rabe65
Posts: 23
Joined: Tue Jul 19, 2016 9:53 pm
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby rabe65 » Wed Aug 03, 2016 12:52 pm

I have the same problem on a different device BUT ONLY when I have my OBD2 bluetooth adapted connected to the unit. Removing it, solves the issue...

Tricktickler
Posts: 4
Joined: Wed Jun 08, 2016 8:02 pm
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby Tricktickler » Fri Aug 05, 2016 5:00 pm

Hi,

you are right rabe65. I disconnected my Bluetooth OBD2 Adapter and the problem was gone :D
Actually it would be nice I wouldn't have to disconnect it but this definatelly solved the issue.

Thank you very much!!!

BR
Markus

JoergH
Posts: 31
Joined: Sun Jul 24, 2016 10:01 am
Location: Germany
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby JoergH » Wed Aug 10, 2016 8:06 pm

Hi Jammy,
same problem at the RQ0268E!
Have Pumpkin realize this behaivor?
Also funny: If the obd2 dongle is disconnected from the port, the pumpkin shows always this dongle as connected (blue icon) and paired!
I have to unpair it and the problem with restart after boot is gone!
Like this post !
Regards Joerg
RQ0268E

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby Jammy » Mon Aug 15, 2016 10:56 am

Hi,
Sorry for the late reply and the trouble caused.
We had got a new firmware which is used for solving this problem.
Here is the update firmware for RQ0268.
https://mega.nz/#!gJNlTbwI!y_9pJo2Cuu0H ... dDQjBo8Lf8
You can install it to make the unit work as it should.
Regards

JoergH
Posts: 31
Joined: Sun Jul 24, 2016 10:01 am
Location: Germany
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby JoergH » Mon Aug 15, 2016 11:09 am

OK! Thank you!
Is there any changelog about this version?
RQ0268E

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby Jammy » Wed Aug 17, 2016 2:01 am

Hi,
You can enter the Settings--About device--Version info to check the build number.
Regards

JoergH
Posts: 31
Joined: Sun Jul 24, 2016 10:01 am
Location: Germany
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby JoergH » Wed Aug 17, 2016 3:56 am

Changelog means a list of (detailed) descriptions of the corrections, not only a build number!
RQ0268E

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Restart after Standby (11-RQ0264-DE-A)

Postby Jammy » Thu Aug 18, 2016 9:34 am

Hi,
The new firmware is used for solving the reboot problem caused by the OBD2 adapter.
And it just has relation with the build number of the version information.
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Android System”

Who is online

Users browsing this forum: No registered users and 13 guests