Update software

[rfunder]

There is an error in your zip file. It won't unpak, and it wont copy from my HD to a TF card. It ask for the last disk in the zip file.


I just paid over $70 for this OBD because it is regarded as the best OBD on the market, so now you ask me to pay another $100 to get the wifi model.
I will try to see, if I can program the OBD Dongle, and change to only 4 digits code.

Regards

[Andy]

Hi there
Thank you for your reply!
First, about the firmware, can you plesa redownload to check? Cause we have tried, there is no problem, so it maybe the problem during download and caused the file issue.
Second, for the dongle, I didn't expect that your Dongle caused that much, our price for this kind of dongle is only around 10USD-20USD. And I didn't ask you to buy another one my friend, I just explain why it is not work, hope you can understand.
Regards!

[rfunder]

Hi

I have tried 3 times to download the zip file, and it keeps asking for the last disk in the file to unpak or copy to TF card.

I'll try to change the passcode on the OBD dongle. The reason it cost that much is that it is 300 x faster then the standard dongles on the market, so there is hardly no delay when using it.

[rfunder]

Still comes with an error in the zip file, when trying to open the zip file, or moving it to the TF card

Regards

[uid65252]

Hello, this is only to inform you:
I have also tested to download the above mentioned file, after download i could not open the file not with 7zip nor with winrar.

this is only test by me. i do not need this file
hope this answer could help
kind regards

[Andy]

[Andy]

[rfunder]

Hi

I can download, and open that file with no problem.
Only problem is that it is in korean or chinese, I think, and it is from 2014.


Regards

Renee

[Andy]

Hi there
Thank you for your reply!
The file is from year 2015 April when we uploaded it to site. And you just need to unzip it and get the two files from it to update on your device.
But just as I mentioned before, this will not solve the OBD issue as it is originally do not support 6 digits OBD to work, hope you can understand.
Regards!

[rfunder]

Hi

I will try to update with the last file I downloaded.
But it does say, that it is from 2014 in the filedata.

I will try if I can change it from 6 to 4 numbers on the OBDLink.

Regards