[AA0497B, AA0496S] How to solve the car stereo consumes the original car battery

Frequently asked questions and answers

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

[AA0497B, AA0496S] How to solve the car stereo consumes the original car battery

Postby Jammy » Thu Feb 27, 2020 7:02 am

AA0497B.jpg
AA0497B.jpg (121.98 KiB) Viewed 23964 times

AA0496S.jpg
AA0496S.jpg (132.02 KiB) Viewed 23964 times


Recently, we have found that some Ford car stereos( AA0497B, AA0496S) would consume all of the original car battery after installation. Therefore, we come up with the following method to solve this problem. The step is simple, just according below picture to cut the red line in the power cord and the problem will be solved. The red line is in the quad lock cable inside the CanBus power cable.

Notice: When cutting the red wire, cut it from the end near the plug. Do not cut from the end near the CanBus, otherwise, the CanBus may fail.

quadlock of the CanBus power cord.png
quadlock of the CanBus power cord.png (6.97 MiB) Viewed 23921 times

red cable.jpg
red cable.jpg (91.19 KiB) Viewed 23780 times


If your car stereo still exists the problem after cut the red line, please feel free to contact us.



PATRAS
Posts: 1
Joined: Mon Oct 01, 2018 5:08 pm
Contact:

Re: [AA0497B, AA0496S] How to solve the car stereo consumes the original car battery

Postby PATRAS » Thu Apr 23, 2020 7:09 am

I had the same issue with Android 8.0 ND0572B, in my Ford Mondeo and i resolved the problem by switching off the android car stereo before switch off car engine.


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “General Configuration”

Who is online

Users browsing this forum: No registered users and 16 guests