Now we can upgrade the AE0273B car stereo to Android 9.0. If you have an AE0273B car stereo, you can consider to upgrade it. But what we have to mention is that the upgrade is risky, so you need to think twice before take action to it.
- AE0273B Android 8.0 Oreo car stereo.png (313.2 KiB) Viewed 25263 times
Notice:
It is risky to upgrade a car stereo OS to Android 9.0 Pie, it will not be protected by the Pumpkin warranty terms after being upgraded.
Needed files:
Upgrade to Android 9.0 firmware(Upgrade_to_Android_9.0.rar) :
https://mega.nz/#!QTJHCYIK!HKvPp_XuHEMZ ... rk6B11hT7E
Android 9.0 update firmware(update.zip) :
https://mega.nz/#!uOBRjIpD!xqE5LR9tpgJ8 ... 2QWuq54akM
Upgrade steps:
Unpack the archive Upgrade_to_Android_9.0.rar
Insert the SD card into the card reader. It is desirable to use a small card, 2-4-8 GB.
Run Rockchip SD_Firmware_Tool.exe on a convenient Windows PC with a Micro SD card reader/writer connected to it. You must run the application as an Administrator.
You do not need to switch any settings. Everything is set up.
Click the "Firmware" button and select the file bootcard.img
Click the "Create" button, then "Yes" and wait until the message with the "Ok" button appears.
Close SD_Firmware_Tool.
Copy the sdupdate.img file to this card, replacing the existing one.
Remove the SD card from the card reader and insert it into the HU in the GPS slot.
Now you need to completely reboot the HU. This can be done by pressing the RST (Reset)
button with a paperclip etc.
If the HU does not reboot, then this button (or the Power button) must be held down until the buttons backlight flashes. Then release.
As a last resort, you can disconnect and reconnect the power cable.
When the message "Doing actions succeeded. Please remove the SD card ..." appears, remove the SD card from the HU.
HU will reboot in recovery Android 9.
Insert the USB flash drive with the update.zip firmware file, which you can find in the archive from the “Download” section, into the USB connector of the radio. USB flash drive must be formatted in FAT32.
We recommend pulling out all other flash drives, SD cards, modems and other devices from the radio jacks.
Select the menu item "Apply update system" - "From USB storage"
The firmware will be installed.
(You can use the SD card for installation, but it will be slower.)
Select the menu item "Wipe data/factory reset".
The user data will be cleared.
Select the menu item "Reboot system now".
The device will reboot in Android 9.
This video shows how to updates car stereo from Android 6.0 to Android 8.0. The procedure from Android 8 to Android 9 is similar.