Reversing camera and other

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Coachl
Posts: 5
Joined: Thu Sep 01, 2016 6:05 pm
Contact:

Reversing camera and other

Postby Coachl » Thu Sep 01, 2016 6:15 pm

Hi,
Order number 205-5127325-7461940
I have recently had your unit and camera installed and I am having an issue. The camer works fine then key is in the ignition but when I start the engine it distorts and finally cuts out. It also does not activate when the engine is on and I go into reverse.

The other things : I wanted to ask is can I change the setting so the drivers side Is changed as when I open drivers side door it shows the passenger being open.

Can I access a menu that will allow me to have a vw logo come up at start

Thanks



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Reversing camera and other

Postby Jammy » Fri Sep 02, 2016 3:40 am

Hi,
Sorry for the troubles brought to you.
About the camera issue, it's caused by the unstable power supply from reverse light positive pole when you start the engine.
You can two way to solve it.
One way is to connect the reverse camera power cable to your car ACC wire.
Or you can ask the auto technician to add a relay to make the reverse light power supply stable no matter you start the engine or not.
About the door open massage issue, you can go to the Settings--factory settings(126)--others to set the "Rudder".
Please click Apply and Exit to save this setting.
If this does not help, we can send you a update firmware to solve this problem.
About the boot logo, you can also enter the factory settings--car logo to set the VW logo.
Regards

Coachl
Posts: 5
Joined: Thu Sep 01, 2016 6:05 pm
Contact:

Re: Reversing camera and other

Postby Coachl » Fri Sep 02, 2016 12:23 pm

Thanks for your reply.

1. I have changed the logo (fix)
2. rudder option does not change the door open diagram.
3. I have connected my ipod which detects it but I can't select or play any music? just says the name of my ipod at the top.
4. can I change the clock widget?
5. can I use the GPS in any application?

Still testing features but happy with unit so far
Regards

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Reversing camera and other

Postby Jammy » Mon Sep 05, 2016 7:59 am

Hi,
Sorry for the late reply due to the weekend.
About the door open issue, please flash the below new firmware to solve it.
https://mega.nz/#!ZYFCGIZY!vlVpc2S_zPiz ... xD2mRZkC60
About the iPod connection, you can only use the iPod which memory is within 64GB, and actually you can use play music through SD card/USB, even via bluetooth when connecting the phone.
This unit does not support the change the clock widget.
You can listen radio or play music when you use the GPS, but you need go to the Settings--GPS to turn on the GPS listen.
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Android System”

Who is online

Users browsing this forum: No registered users and 9 guests