IGO Map update

Technical file download link of PUMPKIN device

Moderators: Jammy, admin

cool_dude84
Posts: 56
Joined: Thu Sep 29, 2016 3:45 pm
Contact:

IGO Map update

Postby cool_dude84 » Sun Oct 02, 2016 3:27 pm

Hi, is there any updated maps which i can download?



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: IGO Map update

Postby Jammy » Fri Oct 07, 2016 2:58 am

Hi,
Sorry for the late reply due to the National Day.
Could you please first tell us your order number?
About the update maps, it does not support to update via website, but if we got new map file from the factory, we can send to you via email, all you need to do is just download and use it.
Regards

cool_dude84
Posts: 56
Joined: Thu Sep 29, 2016 3:45 pm
Contact:

Re: IGO Map update

Postby cool_dude84 » Sun Oct 09, 2016 11:29 am

Hi, i ordered my Pumpkin unit via Aliexpress. The order number is: 75912697506884, which was purchased on 7/6/16. If there's any available map update for Igo, you can send to this e-mail address: babakshock@yahoo.no. I have seen some topics regarding IGO map update, but i need to be sure if i can download this to my device

roscored
Posts: 99
Joined: Sun Apr 17, 2016 10:29 am
Contact:

Re: IGO Map update

Postby roscored » Tue Oct 11, 2016 12:43 am

Hi Jammy you can see from my previous thread I am after updated software for the iGo app too. Is that available yet? or is there a way to update the firmware?

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: IGO Map update

Postby Jammy » Wed Oct 12, 2016 3:24 am


cool_dude84
Posts: 56
Joined: Thu Sep 29, 2016 3:45 pm
Contact:

Re: IGO Map update

Postby cool_dude84 » Thu Oct 13, 2016 10:39 am

Hi, thanks for the map update. I went ahead and installed the map updated into the root of my micro sd card, and plugged in my car's unit slot. I located the appk folder, and i found the IGO map update, and installed it. Now if i want to replace the update with existing IGO gps app, and i answered yes. It all went smooth and nice, and very quickly. I just need to be sure that i have done all the steps correctly?
Last edited by cool_dude84 on Fri Oct 14, 2016 10:12 pm, edited 1 time in total.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: IGO Map update

Postby Jammy » Fri Oct 14, 2016 9:53 am

Hi cool_dude84,
The steps you described are without problem.
Regards

cool_dude84
Posts: 56
Joined: Thu Sep 29, 2016 3:45 pm
Contact:

Re: IGO Map update

Postby cool_dude84 » Tue Oct 18, 2016 9:30 pm

I also did an another procedure, just to be sure that i have installed the newest map. I deleted the old IGO folder within the micro sd which came with the unit. And then i saved the new updated IGO folder into the root of the micro sd card and inserted inside the gps slot. I tested the IGO gps, and it seems that it works fine. Is this the correct way to do, or is it not? And when i try to search an address, and i find i get the pop-up message which says "part of the road is unpaved" What does this message mean?

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: IGO Map update

Postby Jammy » Wed Oct 19, 2016 8:33 am

Hi,
This maps is the 2015 latest version, so some road or building on the maps may have changed, but the maps is out of date and need to update, or the address you searched is too small to be found, sorry about this.
Once we have the new maps, we can post it on the forum or send it to you.
Regards

cool_dude84
Posts: 56
Joined: Thu Sep 29, 2016 3:45 pm
Contact:

Re: IGO Map update

Postby cool_dude84 » Wed Oct 19, 2016 3:58 pm

Why wasn't i informed about this previously? I have now in good faith deleted the old IGO folder, and replaced it with the new and updated version. And now you're saying that the maps are out of date, and needs to be updated. I'm really confused here, because i thougth that i now have updated my IGO map with the one provide your staff. Please help me out here, because i'm really confused at the moment :roll:


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “File Download”

Who is online

Users browsing this forum: No registered users and 11 guests