Have to push the Buttons twice

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
mentox
Posts: 9
Joined: Mon Jun 27, 2016 7:47 am
Contact:

Have to push the Buttons twice

Postby mentox » Tue Oct 18, 2016 5:35 am

Good Morning from Germany

i have two Devices on 4.4.4 and one 5.1 for Volkswagen.

I have to press the buttons twice that they work.
After some Press they work correctly.
Is this a known bug?
is it possible to fix it?

best regards
Dominique



https://www.amazon.de/gp/product/B015E4E3G8


Here the infos from my 4.4.4 Unit

Model S07
MCU MTCB KLD6 V2.86 (Mar 21 2016)
Android 4.4.4_29032016

Kernel 3.0.36+ root@chun #829
Build rk3188-eng4.4.4 29032016.17:20:05
CPU ARM Cortex A9 @ 1.6 (x4)
RAM 1024 MB



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Have to push the Buttons twice

Postby Jammy » Tue Oct 18, 2016 7:09 am

Hi,
Could you please tell us which device has the button issue?
It maybe the button stuck or the system has a delay response.
Does the problem happen again?
If possible, would you mind take a short video to help us check?
Regards

mentox
Posts: 9
Joined: Mon Jun 27, 2016 7:47 am
Contact:

Re: Have to push the Buttons twice

Postby mentox » Tue Oct 18, 2016 8:19 am

Hi

both have the Problem.
It happens after every start of the System.
it doesnt matter if i press directly after boot or wait some time.

i try to make a video. where can i upload the video?

best regards

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Have to push the Buttons twice

Postby Jammy » Wed Oct 19, 2016 3:02 am

Hi,
The operation system cold boot time takes 25-30 seconds, sometime it may need more a little seconds.
Just like the operation system boot, the button board circuit may also need a short time to react.
You can make a video, upload it to youtube, make it public, then send the link to us.
Regards

hairy46chad
Posts: 7
Joined: Mon Jun 20, 2016 6:04 pm
Contact:

Re: Have to push the Buttons twice

Postby hairy46chad » Wed Oct 26, 2016 7:49 pm

I have the same issue.

Everything works ok, you just have to oress the button twice for it to work most of the time. Its almost like the 1st press wakes it up, then the 2nd press works

JoergH
Posts: 31
Joined: Sun Jul 24, 2016 10:01 am
Location: Germany
Contact:

Re: Have to push the Buttons twice

Postby JoergH » Thu Oct 27, 2016 5:22 am

Same issue with RQ268.
All the time with the Navi Button. It doesn't matter if i press 5 seconds after appearing home screen or 2 minutes.
After first start (and sometimes also closed navi app), the Navi button starts / switch to the navi app immediately after a single press!
RQ0268E

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Have to push the Buttons twice

Postby Jammy » Fri Oct 28, 2016 2:08 am

Hi,
About the button issue, sometime you may press it in the improper position or the button signal has a little delay, sorry about this.
You can press the RST hole to restart the unit to check.
If it still does not help, please take a short video and send it to us.
We will check if it's the software problem or the button hardware problem.
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Android System”

Who is online

Users browsing this forum: No registered users and 2 guests