AQVW71 some question

Frequently asked questions and answers

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
abaqust1234
Posts: 4
Joined: Sat Nov 05, 2016 10:25 am
Contact:

AQVW71 some question

Postby abaqust1234 » Sat Nov 05, 2016 10:41 am

Hi!

I just installed the new pumpkin radio from eBay (id pumpkin_cool)


I try to install the apex launcher but I can't add any widget why,?

And where I find the navigation software to download?

I don't have the rear camera but I have the parking sensor, when I put the R gear start the little ops graphics and always rear camera but send me an error message "no signals"
Is possible to have full screen ops graphics without this error?

I have a 2014 beetle...

Many thanks



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: AQVW71 some question

Postby Jammy » Mon Nov 07, 2016 6:52 am

Hi,
Sorry for the late reply due to the weekend.
For the apex launcher, it maybe the app version not compatible with our unit.
Here is the link of the apex launcher which can be installed on our unit.
https://mega.nz/#!EJERhYaI!Yl232zPfQXbi ... Rc1xnIdRsY
You can find the navigation software, such as sygic, here maps and google maps.
If you don't mind, we can send you the free maps provided by factory.
About the rear camera function, it's normal that the display screen will get a message "no signals",but you can still use the reversing radar function, if your original reversing radar, please go to the CarSettings--Common to set it.
If you don't want to see the "no signal" message,there is not a setting which is used for turning off the switch function when you put your car into reverse. but you can find the reverse detective wire from the power cable and cut it, then the unit will not switch into reverse image no matter you driving forward or back your car.
Regards

abaqust1234
Posts: 4
Joined: Sat Nov 05, 2016 10:25 am
Contact:

Re: AQVW71 some question

Postby abaqust1234 » Mon Nov 07, 2016 7:42 pm

Plase give me the link for navigation software


I try to use apex from Google store and your version but I can't add any widget in any case

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: AQVW71 some question

Postby Jammy » Tue Nov 08, 2016 6:41 am

Hi,
Here is the link of the maps, including the navigation software.
https://mega.nz/#!JM8gSApL!_Df8JrFDRcQv ... Z831AFUzkg
Please download through your browser, then refer the another forum to install the navigation. Hope some help.
https://mega.nz/#!JM8gSApL!_Df8JrFDRcQv ... Z831AFUzkg
Regards

abaqust1234
Posts: 4
Joined: Sat Nov 05, 2016 10:25 am
Contact:

Re: AQVW71 some question

Postby abaqust1234 » Wed Nov 09, 2016 9:04 pm

ok thanks for the link for navigation software


but i always have problem with your apex version, i can't add any widget...only the google search bar...

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: AQVW71 some question

Postby Jammy » Thu Nov 10, 2016 10:09 am

Hi,
I tested the apex on the unit which is the same as you, you can hold the installed app and drag it to the apex menu.
Please try this.
Regards

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: AQVW71 some question

Postby Jammy » Fri Nov 11, 2016 10:12 am

Hi Amenophois86,
Did you get the same unit AQVW71 from us?
Regarding your issue, would you mind take a video to help us check?
This unit support the quick boot no matter when you turn on the unit again, and it will not drain your car battery, cause it just has about 3mah current.
Regards

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: AQVW71 some question

Postby Jammy » Mon Nov 14, 2016 2:31 am

Hi,
From your attached video, the unit can quick boot when you switch the key to ACC, but it will restart the android system once you switch to ON.
After discussing your issue and testing with our technician, the quick boot works as it should be as long as the unit can get above 9V power supply. So please check if your car battery has above 9V power supply when you start the engine.
If not, your car battery may have problem.
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “General Configuration”

Who is online

Users browsing this forum: No registered users and 5 guests