First, you need to download the firmware buring tools via your computer based on Windows system.
Then you prepare an empty micro SD card, at least 1GB, insert to your computer.
Then please unzip/extract it out, you will get the softwares in a folder "tool", click the "run_For_Ver2.XX_Loader.bat" file.
- run.jpg (59.95 KiB) Viewed 20767 times
It will open a window, in these red pointed area choose your card and the firmware of the headunit, you can download from .
- choose.jpg (63.32 KiB) Viewed 20767 times
- 3.jpg (57.15 KiB) Viewed 20767 times
Click here to start burn the firmware into the micro SD card.
- 4.jpg (53.18 KiB) Viewed 20740 times
- 5.jpg (49.61 KiB) Viewed 20767 times
- 6.jpg (38.02 KiB) Viewed 20767 times
After it's down, you can click this to confirma and remove the micro SD card from your computer.
- 7.jpg (45.86 KiB) Viewed 20767 times
Then you need to disconnect the power of the headunit, and dismantle the front panel of the radio, find the card slot, and insert the card into it.
- card.jpg (82.76 KiB) Viewed 20767 times
At last, connect the power of the headunit, it will automatically update.
- 9.jpg (54.66 KiB) Viewed 20767 times
Below is a tutorial video for your referrence:
If above solution still can't solve your issue, you may need to change the built in Android board with a new one.