Good day
2 days ago I received new radio PUMPKIN
but after installing the GPS does not work
I have followed your advice I found on the fore unfortunately did not help
Therefore, I would like to ask the new firmware
Example picture of my pumpkin
NO SIGNAL GPS
Re: NO SIGNAL GPS
Hi,
Could you please tell us your order number or buyer ID?
For the GPS issue, please first make sure the GPS antenna connect tightly and try to put it on the roof of the car.
If possible, please check if the GPS antenna port has 3.3V power supply. Here is a picture for your reference.
There is not any new firmware for the unit.
We can send you the original firmware, just hope some help.
https://mega.nz/#!FF8E0bAb!SgNvVjn3HxvI ... cr1BPDo304
You just need to download it through your browser, use a SD card or USB stick(not up to 32GB) to copy the rar update file, don't unzip it.
Then insert the SD card or USB stick into the unit, and the unit will automatically recognize it. Please click clear up and ok.
Regards
Could you please tell us your order number or buyer ID?
For the GPS issue, please first make sure the GPS antenna connect tightly and try to put it on the roof of the car.
If possible, please check if the GPS antenna port has 3.3V power supply. Here is a picture for your reference.
- 1.jpg (528.17 KiB) Viewed 811 times
There is not any new firmware for the unit.
We can send you the original firmware, just hope some help.
https://mega.nz/#!FF8E0bAb!SgNvVjn3HxvI ... cr1BPDo304
You just need to download it through your browser, use a SD card or USB stick(not up to 32GB) to copy the rar update file, don't unzip it.
Then insert the SD card or USB stick into the unit, and the unit will automatically recognize it. Please click clear up and ok.
Regards
Re: NO SIGNAL GPS
I've found out what the problem is.
damaged GPS antenna
damaged GPS antenna
Return to “General Configuration”
Who is online
Users browsing this forum: No registered users and 11 guests