Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

[rjt]

What is the name of the the black twin block of 8 conductors each? The other end of this double connector wire bundle plugs directly into the back of the Pumpkin 27-AQTU73. What is the name of the female mate? I would like to connect the wires to a female mate so that it is easy to disconnect.

[Jammy]

Hi,
This connector is derectly connected to original universal port for car radio.We usually call it universal ISO connector.
Regard.

[rjt]

Metra 70-1784 is what comes with the Pumpkin.
Metra 71-1784 is its mate.
It is common on German cars such as Volkswagon, Audi, BMW - so a junkyard has tons of these. i cut mine out of a German car from the junkyard.

JunkyardFindCarSideOfHarness.jpg

UPullitReceiptForVWsideHarness.png (3.09 MiB) Viewed 2840 times

Some techs refer to it as a "Reverse Wiring Harness".

Most US based automobile car stereo installers seemingly refuse to work with these adapters, they prefer to cut off the end, and splice.

http://www.metraonline.com/part/Audi_Vo ... ss_71-1784

http://www.hifisoundconnection.com/Metr ... wAodrOsPhA

http://m.oreillyauto.com/h5/r/www.oreil ... &ppt=C0107

https://www.walmart.com/ip/New-Metra-71 ... 3=&veh=sem

[rjt]

There must be a complete pinout diagram of this ISO connector already here on the forum, but where?

First HERE on the forum:
and now reposted:

27-AQTU73 Harness Pinout Diagram Guide

27-AQTU73-Harness-Pinout-Diagram.png (264.49 KiB) Viewed 2834 times

[rjt]

Another part number is MEC711784, but appears the same:



I would like a a table of pin numbers/color to function.

[Jammy]

Hi,
sorry for the late reply .
I am puzzled by your problem .
Do you mean that there is not a suit connector in your car for our power cable of the unit?
Could you tell us your car model number ? We try to help you.
Regards

[rjt]

I have a 2006 Toyota Sienna MiniVan. In the USA, only German cars have this international standard organization adapter. I went to the junkyard, found a Volkswagon and cut out the wiring harness inside the vehicle. Then i did not have to splice into wires on the vehicle or radio.

[Jammy]

Hi,
sorry ,it takes so long time and i still can't help you solve the problem.
Do you mean you now need a complete pinout diagram of this ISO connector so that you can connect the wires to your car?
But the diagram you attach before is the complete one,so i don't know how to help you.
For the ISO adapter problem,in my opinion,you can buy one from ebay.
Here is the link.
http://www.ebay.com/itm/Toyota-Camry-87 ... xy4fBTku2L
Hope to help you.
Regards.

[rjt]

ISO 10487 is what I was looking for. WikiPedia has a description and pictures:
https://en.m.wikipedia.org/w/index.php? ... elcome=yes

RaspberryPi Car PC website provides the harnesses needed upon providing a car.
http://i-carus.com/woulditfit/?model=356