The attached photo will give you all of the information that i receive from the unit. When I choose the reboot option the unit simply returns to this screen unless I insert a micro-sd card (4gb in this case) then the unit will boot up after a few tries, I may have to remove and reinsert the card if there is the same screen as in the photo after which it will usually work. Also tried using the reset pinhole with no different result.
Does this message indicate a physical fault or a software problem. If firmware is corrupt please send me the files to flash the unit to repair same. I do not wish to return this unit for repair as I know that it will take too long. If this is not repairable without returning this unit I will return it to amazon for a replacement since this has happened since the first time I powered up. Obviously a defective unit. I do not wish to post a review on amazon that reflects poorly on your product since I really like it when it is working properly.
Also I have, obviously, installed the unit in my 2005 Honda CRV which meant that I had to modify your wiring harness by removing the din connectors and patching in a plug that matched the original wiring harness. I do not want to have to remove all of the cables from my auto unless there is no other option but to return this unit for a refund.
- 0401161827[1].jpg (918.37 KiB) Viewed 1449 times
- 0401161824[1].jpg (905.68 KiB) Viewed 1449 times