[2 Requests] CN10-02201B-US-A

[Pforum]

I am enjoying my CN10-02201B-US-A head unit, but have 2 requests:

-----
ISSUE #1: When illumination is enabled (headlights on) and the car is turned off. The LED backlights stay on even after the screen and headlights are turned off. I assume this is due to standby mode, but I believe the backlights should not draw power in standby mode.

REQUEST #1: Backlights should be turned off in standby mode
-----

-----
ISSUE #2: The internal mic gain is soft.

REQUEST #2: Allow the user to adjust the mic gain in SETUP [presumably adjusting DEC values in /system/etc/mixer_paths.xml]
-----

Thanks.

[Jammy]

Hi,
Regarding the backlight problem,you can set as following show.

QQ截图20170925134617.png (31.18 KiB) Viewed 686 times

Regarding the internal mic gain adjustment,sorry,there is not such setting in this unit.I will react this suggestion to our engineers.Thank you!
Regards

[Pforum]

Thanks for the reply. Changing the Panel Light Setting still leaves the LED backlights on while the unit is in standby mode (although they are no longer connected to the headlight illumination).

[Jammy]

Hi,
please provide a video to me ,i will show it to our engineers.Thanks.
Regards